Skip to content
AutoTyreSize Decode a size

Eon tyre size for every variant, 12 and 13 inch

Quick answer145/80 R12 on base versions, 155/70 R13 on Magna, Sportz and most later trims

Tyre sizes12 or 13 inch rimNo longer sold newChecked 13 Nov 2026

Independent owner guide. Not affiliated with Hyundai. Figures checked against the maker's published details; confirm on your vehicle's door sticker or manual.

Ask for the Eon tyre size your rim dictates: 145/80 R12 for entry cars on 12 inch steel, and 155/70 R13 for the Magna, Sportz and most later trims riding on 13 inch steel. Hyundai stopped selling the Eon new, yet plenty still buzz around city lanes, so the size you need depends on which rim your car carries.

Before you go to the tyre shop, read the sidewall of one of your current tyres. The last part of the code, R12 or R13, settles which group your car belongs to. Further down sit the trim table, a decode of each figure and wear signs.

Eon fitment card

Tyre size
145/80 R12 on base versions, 155/70 R13 on Magna, Sportz and most later trims
Wheels
12 inch or 13 inch steel; hub caps on base trims, full covers on Magna and up
Tyre pressure (cold)
Front 33 psi, rear 33 psi; 36 psi all round at full load
Wheel cap
12 inch or 13 inch, to match the R number on the tyre
Wiper blades
22 inch driver side, 14 inch passenger side (check the old blades)
Status
No longer sold new
Small hatchback 13 inch steel wheel with a 155/70 R13 radial tyre, sidewall in sharp focus
The R12 or R13 at the end of the size tells you which Eon wheel you have.

Hyundai Eon tyre size by variant

VariantFrontRearWheel
D-Lite, D-Lite (O), Era, LPG base145/80 R12145/80 R1212 inch steel, hub caps
Era Plus, later D-Lite Plus155/70 R13 in most listings155/70 R1313 inch steel
Magna, Magna Plus, Sportz, 1.0 Kappa155/70 R13155/70 R1313 inch steel, full wheel cover

Era Plus cars appear with both sizes in different listings, so that trim is the one where you must read the tyre itself. Front and rear sizes never differ on an Eon.

Eon wheel size: 12 inch or 13 inch

At launch, entry Eon trims rolled on 12 inch steel, while the Magna and above got 13 inch steel. Later the 13 inch wheel spread to more trims, and the 1.0 litre Kappa version used it with full covers. Neither group got alloy wheels from the factory. If your hub cap is a small disc in the centre, you probably have the 12 inch rim; a full plastic cover that hides the spokes usually means 13 inch. The tyre code is still the only sure check.

Reading the numbers on an Eon tyre

Take 155/70 R13 as the example. First, 155 is how wide the tyre is across, in mm. Then 70 tells you the wall rises to seven tenths of that width, close to 108 mm. R marks a radial carcass, while 13 equals the wheel's diameter. The 145/80 R12 gives up 10 mm of width in exchange for a deeper wall, which soaks up rough patches well on small rims. For a full walk through every marking, see how to read tyre size.

Moving a 12 inch Eon to 13 inch wheels

Base Eon owners regularly want the bigger wheel look of the Magna. Because Hyundai fitted 155/70 R13 on other Eon trims, this is a factory backed change, not a guess. The overall diameter barely moves:

  • 145/80 R12: 2 x 116 mm wall + 304.8 mm rim = about 537 mm
  • 155/70 R13: 2 x 108.5 mm wall + 330.2 mm rim = about 547 mm

That is a gap of under 2 percent, so the speedometer stays close. Budget for a set of 13 inch steel rims too, because a 13 inch tyre simply cannot mount on the smaller Eon wheel. Keep the same stud pattern as the original wheel and ask the shop to match the hub fit. Wider or lower profile sizes outside these two are not something the maker fitted, so request a full lock test in both directions with an eye kept on the arch liners.

The spare wheel in the boot

Raise the Eon boot board and look at what lies beneath. On most cars it matches the four on the road, but on a car where someone has changed rims, the spare may still be the old size. An old 12 inch spare on a converted car will get you gently to a repair stall, though not along an expressway. Fill it monthly; a soft spare helps nobody at night.

When your Eon needs new tyres

Small hatch tyres wear fastest on the front pair because the engine and steering load sit there. Look for these signs:

  • Grooves worn down to their indicator ridges.
  • Spidery cracking on the walls of an Eon left outdoors through many summers.
  • A blister or gash on the shoulder after the Eon slams a crater; get a fitter to inspect it before carrying on.
  • Tyres aged beyond five or six years, regardless of groove depth. The tyre manufacturing date explainer decodes that stamp.

Swapping axles at 5,000 to 8,000 km intervals spreads wear across all four.

Questions owners ask

Which tyre fits a Hyundai Eon Era Plus?

Most data shows Era Plus cars on 155/70 R13, while a few of this trim left the plant with 145/80 R12. Read the code on your own tyre sidewall before buying.

Is the Eon wheel size 12 or 13 inch?

Both were fitted. Base trims such as D-Lite and Era used 12 inch steel wheels, while Magna, Sportz and the 1.0 litre version used 13 inch steel wheels.

Will 155/70 R13 go onto a 12 inch Eon?

Yes, once matching 13 inch rims are bought. Hyundai used that size on higher Eon trims and the outer diameter grows under 2 percent.

Are Eon tyres tubeless?

Factory Eon tyres are tubeless radials. Tread nail holes are usually plugged within minutes at a puncture stall, though a wall puncture means replacement.

Does the Eon use the same tyre front and rear?

Yes. One size covers each corner of an Eon, so rotating them is straightforward.

How long do Eon tyres last?

On mixed city use they often last 35,000 to 45,000 km, depending on alignment, pressure and road quality. Check tread depth and age, not just distance.