Skip to content
AutoTyreSize Decode a size

Tyre Manufacturing Date: Where to Find It and How to Read It

Quick answerLast four digits of the code on the sidewall: week, then year, like 3725

Tyre careCar and bikeFour digit codeChecked 13 Nov 2026

Close up of a black tyre sidewall showing a raised four digit date code inside a small oval near the rim

The tyre manufacturing date is the four digit number moulded into the sidewall, usually at the end of a longer code, where the opening pair of digits gives the week and the closing pair gives the year it was made. So a code of 3725 points to week 37 of the year ending in 25, and 1124 means the 11th week of the year ending in 24.

This guide shows where to look on car, bike and scooter tyres, how to read the code with examples, what to do if you only find three digits or none at all, and how old is too old. It also covers what to check before you accept new tyres at a shop.

At a glance

  • WhereLower sidewall, at the end of a code, often in a small oval box
  • FormatFour digits: two for week, two for year
  • Example3725 = week 37 of the year ending in 25
  • Only one sideThe full code may be on the inner sidewall only
  • Inspect fromAbout five years after the manufacturing date
  • Replace byTen years from manufacture at the latest, whatever the tread

Where the tyre manufacturing date sits and how to find it

To check the date, look on the lower part of the sidewall, near the rim, away from the big size marking. You are hunting for a short block of letters and numbers that often starts with a plant code and ends with four digits set apart from the rest, sometimes inside a raised oval. On tyres made for export it follows the letters DOT; on many Indian tyres it sits near the BIS standard mark and the serial number.

The complete code is required on only one side of the tyre in many markets, so it may face inward. On a car, swing the steering fully to one side to see the inner face of a front tyre, or use your phone camera. On rear tyres you may need to look from under the bumper with a torch.

How to identify tyre manufacturing date from the code

Code on tyreWeekYearRoughly
012401ends in 24First week of January
112411ends in 24Mid March
262326ends in 23End of June
372537ends in 25Mid September
482248ends in 22End of November
522152ends in 21Last week of December

Use this as a simple tyre manufacturing date chart: divide the week by about 4.3 to get the month. The first two digits can run from 01 to 52, or 53 in a long year. The last two digits are the year.

Do not confuse the code with the size, such as 185/65 R15, or with the load and speed symbol like 88H. The date is always four digits standing alone.

How to check bike tyre manufacturing date

Bike tyre manufacturing date codes work the same way: four digits, week then year. Two wheeler tyres are smaller, so the code is tiny and easy to miss among the many markings. With the bike up on its main stand, rotate the wheel slowly, and look at both sidewalls near the rim with a torch held at a low angle so the raised digits cast a shadow.

On scooters with small 10 or 12 inch wheels, the code may be partly hidden by the body panel or the brake. Rotate the wheel until it comes into view. If the tyre is dusty or dressed in shine spray, wipe that patch with a damp cloth first.

Three digit codes, missing codes and odd formats

A code with only three digits comes from the old system, used before the four digit format came in. Such a tyre is very old by any measure and should be replaced, even if it looks new.

If you cannot find any date at all, the tyre may have been retreaded, the code may be on the other side, or a kerb scrape may have worn it off. A few tyres show the month and year instead of a week. When in doubt, ask the tyre shop to read it for you, and do not accept a new tyre whose date you cannot confirm.

There is no public database to check tyre age by serial number, so the tyre manufacturing date check has to be done on the tyre itself.

Tyre expiry date: how old is too old

Tyres do not carry a printed expiry date. Rubber hardens and cracks with age, heat and sunlight even when the tread looks deep. Anyone asking about a tyre expiry date really needs to know how to check tyre manufacturing date first, then judge the condition of the rubber.

  • Around five years from manufacture: leading tyre makers advise a yearly inspection by a tyre professional from this point.
  • Ten years from manufacture: the widely used maximum, after which the tyre should be replaced whatever its tread. This includes the spare.
  • Earlier if needed: cracks in the sidewall or between tread blocks, bulges, or hardened rubber mean replace now. Your vehicle maker's advice in the owner's manual comes first.
Indian heat, parking in direct sun and long periods standing still all speed up ageing. If you see cracks or bulges, get a fitter to look it over before your next highway trip.

How to check new tyre manufacturing date at the shop

  1. Before fitting, ask to see each tyre and read the four digit code yourself.
  2. Check that all tyres on the same axle have similar dates, so they age and wear together.
  3. Ask for fresh stock if any tyre seems to have sat in storage for a long time.
  4. Note the codes on your bill or phone so you know the age later.
  5. Look for storage damage: flattening, dust deep in the grooves, or fine cracks.

A tyre kept in a cool, dark store ages slowly, so a few months of storage is normal. What you want to avoid is a tyre that has spent years in a hot warehouse.

Using the date with tread and pressure checks

Age is one of three checks. Tread depth tells you about wear; see tyre tread. Pressure tells you whether the tyre is working as designed; see tyre pressure. And the date tells you how much the rubber has aged. A car driven little, like a second car parked most of the week, may reach its age limit long before its tread runs out.

Every vehicle's tyre size and our other care guides are reachable from the AutoTyreSize home page.

Questions owners ask

How to know tyre manufacturing date quickly?

Find the four digits standing alone at the end of the code on the lower sidewall. Read the opening pair as the week number and the closing pair as the year. If it is not on the outer side, look at the inner side.

What does 3725 mean on a tyre?

It means the tyre was made in the 37th week of the year ending in 25, which is around mid September. Any four digit code reads the same way.

Is a one year old new tyre safe to buy?

Usually yes, if it was stored properly and shows no cracks or flattening. Tyres age slowly in cool, dark storage. Still, check that tyres on the same axle have similar dates.

Where is the tyre manufacturing date written on a bike tyre?

On the sidewall near the rim, often in a small box or oval, sometimes on one side only. Use a torch at a low angle to read the raised digits.

Can I check tyre age with the serial number online?

No public database exists for this. The age has to be read from the code moulded on the tyre itself.

Does the spare tyre also age?

Yes. A spare that has never touched the road still ages from its manufacturing date. Check its code and condition, and replace it when it reaches the same age limits as the other tyres.