Skip to content
AutoTyreSize Decode a size

Brezza alloy wheels: sizes, PCD and upgrades

Quick answer16 inch alloys on ZXi and ZXi+; LXi and VXi petrol have 16 inch steel wheels

Wheels215/60 R16 tyreSteel on LXi, VXiChecked 13 Nov 2026

Independent owner guide. Not affiliated with Maruti Suzuki. Figures checked against the maker's published details; confirm on your vehicle's door sticker or manual.

Factory Brezza alloy wheels measure 16 inches and are fitted to the ZXi and the top ZXi+, both wearing 215/60 R16 tyres. The ZXi+ gets a dual tone machined finish, while the ZXi wheel is a simpler alloy design.

The LXi and VXi petrol roll on 16 inch pressed steel rims hidden by plastic trims. With an identical 16 inch rim, an owner of a lower trim can move to alloys without changing tyre size. Maruti Suzuki even lists a genuine accessory alloy made for L and V trims.

Brezza fitment card

Tyre size
215/60 R16 on every current variant, LXi to ZXi+
Wheels
16 inch steel with covers (LXi, VXi petrol), 16 inch alloy (ZXi, ZXi+)
Tyre pressure (cold)
Front 33 psi, rear 33 psi at normal load
Full load front
36 psi front; read the door sticker for the loaded rear figure
Earlier Vitara Brezza
205/60 R16 on LDi, VDi, LXi, VXi; 215/60 R16 on ZDi, ZXi and plus trims
PCD (Vitara Brezza)
5 x 114.3 mm, 60.1 mm centre bore, M12 x 1.25 nuts
Wiper blades
24 inch driver side, 16 inch passenger side
Wheel cap
16 inch, on steel wheel variants
Front fog lamps
LED fog lamps on ZXi+; lower trims have blank inserts
Dual tone machined 16 inch alloy wheel with tyre on a compact SUV in a workshop bay
A 16 inch two tone machined alloy like the one fitted to top trims

Factory Brezza alloy wheels by variant

Brezza wheels by variant
VariantWheelTyre
LXi, VXi petrol16 inch steel with cover215/60 R16
ZXi16 inch alloy215/60 R16
ZXi+16 inch dual tone machined alloy215/60 R16
Earlier Vitara Brezza ZDi, ZXi and plus16 inch alloy215/60 R16

Some variant guides list black alloys on certain VXi versions. If your VXi has alloys from the showroom, the size is still 16 inches. Tyres matched to each of these wheels are on our Brezza tyre size page.

PCD, centre bore and nuts

For the earlier Vitara Brezza, wheel data sources list a 5 x 114.3 mm PCD, a 60.1 mm hub bore and M12 x 1.25 wheel nuts. The current Brezza uses the same 16 inch size, but confirm the stud count and pattern on your own hub before you buy aftermarket wheels. Count the studs, measure the spacing, or bolt one bare rim onto the Brezza hub as a trial before tyres go on.

To size up a five stud hub yourself, use the PCD calculator. Any hub hole on the new rim must match or be closed up with a proper hub ring, or the wheel will vibrate at highway speed.

Swapping LXi or VXi steel rims for alloys

The simplest upgrade keeps the 16 inch size and the 215/60 R16 tyre. Benefits are easier cleaning, a bit less unsprung weight with many designs, and better looks. That accessory alloy for L and V trims is designed for this car, so offset and bore are correct. An aftermarket wheel needs the same PCD, bore, offset and weight rating confirmed.

Keep the old steel wheels if you have space. Some owners refit them for long trips in rough areas where a cracked alloy would be hard to replace.

17 and 18 inch options and their trade offs

Bigger wheels are popular, but Maruti Suzuki fits only 16 inch wheels on the Brezza. A 17 inch wheel with 215/55 R17 or an 18 inch with 215/50 R18 keeps the overall height close to stock. What you give up:

  • A thinner sidewall that passes more of every pothole into the cabin.
  • A higher chance of bent rims on broken city roads.
  • Tyres in rarer sizes, which small town dealers seldom stock and which carry a higher replacement bill.
  • Possible warranty questions on suspension parts, and the need to tell your insurer.

Read the general alloy wheels guide and the 17 inch alloy wheels page before deciding.

Caring for machined and painted alloys

On the ZXi+ wheel, a thin clear lacquer protects the bright cut metal. Once that coat is chipped, road salt and brake dust get under it and the metal turns white and patchy. A bucket of gentle shampoo and a soft wheel brush is all the Brezza rims need; skip acid based cleaners. Once you have splashed through monsoon waterlogging, rinse the wheels so mud does not dry on them.

Kerb rash on that bright face can be cut back on a wheel lathe by a specialist. The diamond cut alloy wheels page explains how that works and its limits.

Spotting a bent or cracked wheel

Steering shake around 60 to 80 km/h, starting right after a deep pothole, often points to a bent rim, not just lost balance weights. A slow air leak from a tyre with no puncture can come from a crack at the bead seat.

Do not drive on a cracked alloy. Get the Brezza rim checked by a specialist, because a crack can grow without warning under load.

Keeping the alloys on the car

Thieves in open parking lots like the ZXi+ machined wheels. Fitting one lockable nut on each wheel slows a thief down a lot. Keep the key in the toolkit, not the glovebox, and tell the tyre shop where it is when you go for service.

Questions owners ask

What size are Brezza alloy wheels?

16 inches on the ZXi and ZXi+, carrying 215/60 R16 tyres.

Does the Brezza VXi have alloy wheels?

The VXi petrol comes on 16 inch steel rims under covers. Some versions are listed with alloys, so check your car. A genuine accessory alloy for these trims is on the parts list.

Do 17 inch wheels suit this Maruti SUV?

It can be done using 215/55 R17 rubber, which holds the height near to stock. No factory Brezza wears this size, so ride comfort and warranty may suffer, and the insurance company should hear about it.

What is the Brezza PCD?

For the earlier Vitara Brezza, wheel catalogues give 5 x 114.3 mm and a 60.1 mm bore. Confirm on your own hub before buying aftermarket wheels for the current car.

Will alloys improve mileage?

The gain is small and only appears when the new rims weigh less than the old steel ones. Correct tyre pressure has a much bigger effect on fuel economy.