Skip to content
AutoTyreSize Decode a size

TVS Ronin Tyre Size, Front and Rear

Quick answer110/70-17 front and 130/70-17 rear, tubeless, on every Ronin variant

Tyre sizesAll variantsTubeless17 inch alloysChecked 13 Nov 2026

Independent owner guide. Not affiliated with TVS. Figures checked against the maker's published details; confirm on your vehicle's door sticker or manual.

The TVS Ronin tyre size is 110/70-17 up front with 130/70-17 behind, tubeless covers on 17 inch alloys. All three variants, SS, DS and TD, share this setup, so the colour scheme or ABS type on your bike does not change the tyres you buy.

The Ronin's factory tyres have a chunky block pattern that suits its scrambler styling and the odd broken patch of road. When you replace them, you can keep that look or pick a road focused pattern for more grip on tar.

Ronin fitment card

Front tyre
110/70-17 tubeless
Rear tyre
130/70-17 tubeless
Wheels
17 inch alloy front and rear on every variant (SS, DS, TD)
Tyre pressure (cold)
Front 25 psi; rear 28 psi solo, 32 psi with pillion
Brakes
Disc front and rear; dual channel ABS on TD, single channel on SS and DS
Battery
12 V, 6 Ah
Block pattern 17 inch rear tyre on a black alloy wheel of a retro style motorcycle parked on a paved road
A block pattern rear tyre on a 17 inch alloy, the setup this retro bike uses.

TVS Ronin tyre size for SS, DS and TD

VariantFrontRearWheel
SS110/70-17 tubeless130/70-17 tubeless17 inch alloy
DS110/70-17 tubeless130/70-17 tubeless17 inch alloy
TD (top model)110/70-17 tubeless130/70-17 tubeless17 inch alloy

Put plainly, the ronin front tyre size reads 110/70-17, while the ronin rear tyre size, the back tyre size riders ask for, reads 130/70-17. Both wheels are the same 17 inch diameter, which makes stocking easy for tyre shops even in smaller towns.

Reading the Ronin's tyre markings

  • 110 and 130: tyre width in mm, front and rear.
  • 70: profile, so the front wall stands near 77 mm and the rear near 91 mm.
  • 17: rim diameter in inches.
  • A hyphen in place of an R means the size is not marked as a radial. Radial replacements in this size carry an R, such as 130/70 R17.

Printed beside these sizes are a load code and speed symbol. The Ronin's factory codes were not verifiable for this page, so read them off your present tyres and buy equal or higher. Our speed rating page decodes the letters.

Can you fit a wider Ronin rear tyre

SizeOverall diameterChange
130/70-17 (stock rear)431.8 + 2 x 91 = 613.8 mmBaseline
140/70-17431.8 + 2 x 98 = 627.8 mm+2.3 percent
110/70-17 (stock front)431.8 + 2 x 77 = 585.8 mmBaseline
120/70-17 front431.8 + 2 x 84 = 599.8 mm+2.4 percent

A 140/70-17 rear is the size riders ask for most. It stays under the 3 percent height limit, but the stock rim width may not suit it, and the wider tyre can touch the chain guard or the swingarm. Steering also slows. Have a tyre shop confirm rim width and clearance first.

Block pattern or road pattern

The factory block tread looks rugged and copes with gravel and wet mud on village roads. On hot tar it can feel a little vague when pushed in corners, and it hums at highway speed. Riders who mostly commute on city roads often choose a road pattern at replacement for better wet grip. Riders who take the Ronin on weekend trails keep the blocks. Both work at the factory size.

Tubeless care on a Ronin

A nail in a tubeless Ronin tyre usually lets air out gradually, buying time to reach a repairer at low speed. Carry a small kit and an inflator for highway rides; our puncture kit guide shows how to plug a hole. Never fit a tube to cover a damaged sidewall. If you spot a gash, a swelling or bare cords, ride gently to a tyre specialist and let them judge it.

When to replace Ronin tyres

Rear rubber goes first, especially when the Ronin regularly carries a pillion. Swap a tyre once grooves near the wear bars, around 1.5 to 2 mm for rain safety, or if age cracks appear. To work out a tyre's age, read the four figure stamp using our manufacturing date guide. A squared off rear profile after long highway use also makes the bike reluctant to lean.

Questions owners ask

TVS Ronin rear tyre size?

It is 130/70-17, tubeless, identical across SS, DS and TD.

TVS Ronin front tyre size?

It is 110/70-17, tubeless, over a 17 inch rim.

Does the TD variant get different tyres?

No. The TD adds dual channel ABS and other features, but its tyres match the SS and DS.

Can I fit a 150 section rear tyre on the Ronin?

It is not advised. It would need a wider rim, may rub the swingarm or chain guard, and slows steering. Stay at 130 or, after checking clearance, 140.

Does Ronin back tyre size differ from its rear size?

No. Back tyre and rear tyre mean the same wheel, and the size is 130/70-17.

Are radial tyres available in the Ronin size?

Some tyre makers offer radials in 110/70 and 130/70 for 17 inch rims. They grip well but cost more. Check the load index matches.