Skip to content
AutoTyreSize Decode a size

Pulsar 150 tyre size, front and back, for single disc and twin disc

Quick answerSingle disc 80/100-17 front, 100/90-17 rear; twin disc 90/90-17 front, 120/80-17 rear

Tyre sizes17 inch alloysTubelessSD and TDChecked 13 Nov 2026

Independent owner guide. Not affiliated with Bajaj. Figures checked against the maker's published details; confirm on your vehicle's door sticker or manual.

The Bajaj Pulsar 150 tyre size depends on the brake version: the single disc bike wears 80/100-17 ahead and 100/90-17 behind, while the twin disc bike wears fatter 90/90-17 and 120/80-17 tyres. All four are tubeless, and every one mounts on a 17 inch alloy rim.

So, before ordering rubber, glance at your back wheel. A drum at the back means you have the single disc model. A second disc at the back means twin disc. Then read the size on the old tyre wall to be sure nobody changed it before you bought the bike.

Pulsar 150 fitment card

Front tyre
80/100-17 46P tubeless (single disc), 90/90-17 49P tubeless (twin disc)
Rear tyre
100/90-17 55P tubeless (single disc), 120/80-17 61P tubeless (twin disc)
Wheels
17 inch alloy, front and rear
Tyre pressure (cold)
Front 25 psi, rear 28.4 psi solo, rear 32 psi with pillion
Battery
12 V, 4 Ah VRLA (sealed, maintenance free), under the left side cover
Rear tyre sidewall of a 150 cc commuter motorcycle on a 17 inch alloy wheel, showing size markings
Read the size on your old tyre wall before you buy; SD and TD bikes differ

Pulsar 150 tyre size front and back, SD versus TD

VersionFrontRearWheel
Single disc (SD)80/100-17 46P100/90-17 55P17 inch alloy
Twin disc (TD), single seat or split seat90/90-17 49P120/80-17 61P17 inch alloy

Bajaj prints these sizes in the current bike's manual, and every tyre is tubeless. The single disc model has a front disc and a rear drum. The twin disc bike gets discs at both ends plus the wider rubber, which is why it feels more planted when you brake hard from highway speed. The split seat and single seat twin disc bikes share the same tyres.

Reading 80/100-17 and 120/80-17 on the sidewall

Take the SD front, 80/100-17. Eighty is section width in millimetres. A ratio of 100 makes sidewall height equal to that width, roughly 80 mm. Seventeen is the wheel, in inches, where the tyre bead seats. On the TD's back wheel, 120/80-17 translates to a 120 mm section whose wall reaches roughly 96 mm, again over a 17 inch rim.

Next comes a two part service code. The manual lists 46P and 55P for the single disc bike, and 49P and 61P for the twin disc bike. The letter P marks a 150 km/h speed rating. The load index number is the weight one tyre can carry; a higher number means a stronger tyre. Do not drop below these numbers when buying, especially on a Pulsar that carries a pillion to office every day.

Can you fit the twin disc tyres on a single disc Pulsar

This is the most common request at our counter. Single disc owners covet the chunkier TD stance. The front 90/90-17 is a small change on paper, but it is still not the factory size for that bike, and the rear 120/80-17 is a much bigger step. The single disc rear rim is narrower, and a 120 section tyre on it bulges at the sides, changes how the bike leans into corners and may foul the chain or swingarm on some bikes.

Compare the overall diameter. A 100/90-17 rear is 431.8 + 2 x 90 = 611.8 mm tall. A 120/80-17 is 431.8 + 2 x 96 = 623.8 mm, about 2 percent taller, so your speedo would under read slightly. If you still want it, get the rim width and swingarm clearance first. Going one step up, to 110/80-17 at the rear, is a smaller change that many owners settle on.

Older Pulsar 150 models

The single disc Pulsar 150 has used 80/100-17 front and 100/90-17 rear for a long time, so the earlier DTS-i bikes you see in second hand listings normally take the same sizes. Some older bikes still run on spoke wheels with tube tyres, so check whether your rim is alloy or spoked before asking for a tubeless tyre. The Pulsar N150 and P150 are separate models with their own sizes, so do not mix up their tyres with the classic Pulsar 150.

When to replace Pulsar 150 tyres

  • Tread: on a daily commuter Pulsar, the back tyre usually finishes first, often well before the front. Tiny raised bars sit inside the grooves; once the surface wears down flush with them, replace.
  • Cracks: bikes parked in the sun every day get fine cracks on the sidewall. Deep cracks mean the rubber has aged.
  • Bulges and cuts: a pothole hit can leave a bulge on the sidewall. Do not ride on it; crawl the bike to a tyre shop, where someone can inspect it properly.
  • Age: a four digit week and year stamp sits on every sidewall. Got a digital machine showing odd units? Our guide to reading the tyre date explains it.

A bald back tyre lets go first when it rains, often on painted zebra lines and on metal plates at flyover joints.

Tubeless puncture repair on the Pulsar

Because the Pulsar 150 runs tubeless tyres, a nail usually gives a slow leak, not a sudden flat. Leave the nail in, ride slowly to the nearest puncture shop and ask for a plug repair. Most roadside shops fix tubeless tyres with a rubber plug in a few minutes without removing the wheel. If the cut is on the sidewall or bigger than a small nail, the tyre needs replacing. The manual also warns that the tyre bead in contact with the rim must not be damaged during fitting, so let the shop use a proper tyre changer, not tyre levers and a hammer.

Pressure goes with the size

Both versions use the same cold pressure in the manual, whichever tyre size you have. Front and rear figures, solo and with a pillion, are on our Pulsar 150 tyre pressure page. For sizing across commuters and sports bikes, read the bike tyre size guide. If you are weighing the Pulsar against a bigger sibling, the Pulsar 220 tyre size page shows how its sizes differ.

Questions owners ask

What is the Pulsar 150 front tyre size?

The single disc Pulsar 150 front tyre size is 80/100-17. The twin disc model uses a wider 90/90-17 front. Both are tubeless and fit a 17 inch alloy rim.

What is the Pulsar 150 back tyre size?

Out back, an SD Pulsar takes 100/90-17 on the single disc bike and 120/80-17 on the twin disc bike. The rear is the tyre you will replace most often, since chain drive and your body weight both act on it.

What is the Pulsar 150 twin disc back tyre size?

The twin disc rear tyre is 120/80-17 carrying a 61P service code, tubeless. The front on the same bike is 90/90-17 49P.

Is the Pulsar 150 tyre tubeless?

Yes, the current bike has tubeless tyres on alloy wheels front and rear. Any older Pulsar still rolling on wire spokes needs tubed rubber, so look at your wheels first.

Can I fit 110/80-17 at the rear of a single disc Pulsar 150?

Many owners do, and it is a smaller jump than the 120 section tyre. It is still not a factory size for the single disc bike, so get rim width and chain clearance, and expect slightly heavier steering.

Do Pulsar 150 tyres fit the Pulsar 220?

Not as a rule. The bigger Pulsar has its own sizes, so match the size printed on your current tyre, not the model name on the tank.