Innova Crysta alloy wheels are made in a pair of diameters: 16 inch on the GX, GX+ and VX, and 17 inch on the top ZX. The 16 inch rims wear 205/65 R16 tyres and the 17 inch rims wear 215/55 R17.
Owners of the older base G, which had steel wheels with covers, often ask about switching to alloys, and GX owners ask about the ZX look. Both are possible with care. This page covers the factory wheels, what to match, the ride trade offs and how to stop diamond cut finishes from dulling.
Innova Crysta fitment card
- Tyre size
- 205/65 R16 (GX, GX+, VX), 215/55 R17 (ZX)
- Wheels
- 16 inch alloy on GX, GX+ and VX, 17 inch alloy on ZX
- Tyre pressure (cold)
- Front 33 psi, rear 33 psi
- Full load pressure
- Front 33 psi, rear 36 psi
- Spare
- Full size 205/65 R16 spare
- Fog lamps
- Front fog lamps on VX and ZX, not on GX or GX+
- Engine
- 2.4 litre diesel only on the current car

Factory wheels on each Crysta trim
| Variant | Wheel | Tyre |
|---|---|---|
| GX | 16 inch alloy | 205/65 R16 |
| GX+ | 16 inch diamond cut alloy | 205/65 R16 |
| VX | 16 inch alloy | 205/65 R16 |
| ZX | 17 inch alloy | 215/55 R17 |
| Earlier version G | 16 inch steel with full cover | 205/65 R16 |
Underneath the car hangs a steel spare carrying a 205/65 R16. A few listings show the VX on 17 inch wheels; on a used car, look for the rim size cast into the back face of a spoke.
Innova Crysta alloy wheels: what must match
A wheel from another car can look right and still be wrong. Before buying aftermarket or used Crysta alloys, confirm these points against your current wheel:
- Bolt pattern (PCD): how many studs the hub has and how wide a ring they form. Count the studs and measure, or use our PCD calculator.
- Centre bore: a Crysta wheel locates on the hub spigot, so an oversized hole needs a spacer ring.
- Offset: the distance in millimetres between the hub contact surface and the rim's centre line. Wrong offset pushes the tyre into the arch or the suspension.
- Load rating: eight occupants plus luggage put real strain on a rim, so ask for its rated capacity.
We have not confirmed the Crysta PCD and offset from two sources, so read them off a factory wheel or ask a dealer.
Going from 16 to 17 inch
Toyota pairs its 17 inch rims with 215/55 R17 rubber on the ZX, and copying that pairing is the least risky step for a GX, GX+ or VX. Overall tyre height stays within 1 percent (about 668 mm against 673 mm), so the speedometer barely changes.
The catch is the lower sidewall. Toyota itself once took 17 inch wheels off the ZX after owners reported tyre damage when the car ran loaded. If your Crysta does a lot of village roads, ghat sections or overloaded family trips, the factory 16 inch rims with their deeper rubber forgive far more abuse.
Reasons to stop at 17 inch on a Crysta
Some fitters offer 18 inch alloys on a Crysta. To keep the overall height, the tyre must have an even thinner wall, which means a hard ride for third row passengers, easy rim damage on potholes and costlier tyres. Steering lock can also suffer if the tyre is wider. A dealer may also turn down suspension warranty work, and you should inform the insurance company.
Care for Crysta alloys
A bucket of water, some gentle car wash liquid and a soft bristle brush are enough for a Crysta wheel; rinse off the black brake dust weekly so it never bakes onto the paint. Strong acid cleaners from roadside stalls etch the lacquer and should stay away. Following a monsoon wade, also hose the back of each rim where mud and grit gather. Get balancing done whenever a tyre is changed, since an MPV with unbalanced wheels shakes at highway speed.
Diamond cut GX+ wheels and kerb damage
The bright cut finish on GX+ rims makes every scuff obvious. Shallow kerb rash can be skimmed off on a wheel lathe and sealed with fresh clear coat. A cracked or bent rim is different: have it inspected, and do not let anyone weld a cracked alloy on a car this heavy. We explain re-cutting in detail under diamond cut alloy wheels.
Tyres and pressure that go with the wheels
Each trim's rubber is listed in Innova Crysta tyre size, with inflation numbers in Innova Crysta tyre pressure. For other models, see Fortuner alloy wheels or the Ertiga alloy wheels page. Advice that applies to every car is collected under alloy wheels, while 17 inch alloy wheels focuses on the ZX size.
Questions owners ask
What size are crysta alloy wheels?
16 inch on the GX, GX+ and VX, and 17 inch on the ZX. The spare is a 16 inch steel wheel.
Will ZX rims bolt onto a GX?
Yes. They come off the same Crysta parts list, so stud pattern, bore and inset all line up. Fit 215/55 R17 tyres with them.
Are 17 inch wheels worse on bad roads?
Their shallower rubber absorbs less of each pothole and is more prone to damage under heavy load. Sixteen inch rims give the softer ride.
Do old Innova alloys fit an Innova Crysta?
No. The older Innova used 15 inch wheels, and its tyres and wheel design differ. Measure before trying any swap.
Can alloys be fitted to the old base G with steel wheels?
Yes. 16 inch Crysta alloys from a GX keep the same 205/65 R16 tyres, so you can move your existing tyres across.
Will bigger alloys affect insurance?
A non factory wheel size can affect claims. Tell your insurer in writing and keep the bill.