The Fortuner alloy wheels size is 17 inch on the 4x2 versions while the 4x4 and the two special editions carry 18 inch rims; no version leaves the factory on steel wheels. Its six stud pattern (PCD) measures 6 x 139.7 mm with a 106.1 mm centre bore.
That six bolt pattern is common to large Indian body on frame vehicles, so you will find many wheels that bolt on. Bolting on is not the same as fitting right, which is what this page is about.
Fortuner fitment card
- Tyre size, 4x2
- 265/65 R17 on 17 inch alloys
- Tyre size, 4x4
- 265/60 R18 on 18 inch alloys
- Legender and GR-S
- 265/60 R18 on 18 inch alloys
- Tyre pressure (cold)
- 32 psi front and rear, 36 psi at full load (check the door sticker)
- PCD
- 6 x 139.7 mm
- Centre bore
- 106.1 mm

Fortuner alloy wheels size by variant
| Variant | Wheel | Tyre |
|---|---|---|
| 4x2 MT and AT | 17 inch alloy | 265/65 R17 |
| 4x4 MT and AT | 18 inch alloy | 265/60 R18 |
| Legender | 18 inch dual tone alloy | 265/60 R18 |
| GR-S | 18 inch black alloy | 265/60 R18 |
The Legender and GR-S wheels differ mainly in finish and design. A genuine wheel from any 18 inch version fits another of the same generation.
PCD, centre bore and offset
- PCD 6 x 139.7 mm: six studs on a 139.7 mm circle. Wheels with a different count or circle will not bolt on safely, and adapters are not a good idea on a heavy SUV.
- Centre bore 106.1 mm: that middle hole should slide over the hub with almost no play. If an aftermarket wheel has a bigger hole, it needs proper hub centric rings, or the wheel vibrates at speed.
- Offset: the distance between the rim centre line and the face that bolts to the hub. Get it wrong and the tyre moves toward the arch liner or the suspension. Ask the seller for the offset of the genuine Fortuner wheel for your version and match it.
The PCD calculator helps you check a wheel before buying.
Popular upgrades and the trade offs
The most common upgrade is a 4x2 owner moving from 17 to 18 inch, using the 265/60 R18 that Toyota itself fits on the 4x2 Legender. The outer diameter stays within a millimetre, so the speedo reads the same and the SUV sits at its usual height. You give up a little ride comfort and pay more for each tyre.
Going to 20 inch or more means very low profile tyres. Those ride stiffly, the rim edge takes pothole hits directly and the tyre range in such sizes is narrower. No factory Fortuner wears them, so we cannot call them a match.
Load rating matters more than looks
Every alloy has a maximum load rating. A Fortuner with seven people, luggage and a roof carrier pushes each wheel hard. Get the per wheel load figure in writing from the seller, then check it against half the gross axle weight shown for your SUV. Wheels made for lighter SUVs may share the bolt pattern of a pickup but not the strength.
Care and cleaning
Every week or two, loosen brake dust with a gentle, non acidic wheel wash and a soft bristle brush; brake dust baked on by heat stains machined faces. Rinse after driving through flooded streets in the monsoon, since mud packed inside the barrel unbalances the wheel. Avoid acid based cleaners on dual tone and black finishes. After any hard rock hit off road, crawl down and inspect the inside edge of each rim for dents.
Machined finish repair
The 4x4 and Legender wheels have a machined, two tone face. Kerb scrapes can be fixed by re machining on a lathe followed by a clear coat. Every pass on the lathe shaves off metal, which limits how often a wheel can be re cut. For bends or cracks, replace the wheel. Our diamond cut alloy wheels guide sets out the repair limits for this finish.
Questions owners ask
What size alloy wheels come on the Fortuner?
Two sizes: 4x2 cars roll on 17 inch rims, everything else on 18 inch rims.
What is the Fortuner PCD?
6 x 139.7 mm, with a 106.1 mm centre bore. Any wheel you fit must match both.
Can I fit Legender alloys on a normal Fortuner?
Yes, if they are genuine wheels for the same generation and you fit 265/60 R18 tyres. Check the offset with the dealer first.
Are 20 inch alloys safe on the Fortuner?
Toyota offers nothing that large. Rims of that size force a thin, stiff tyre, which rides harshly and are more prone to damage on Indian roads.
Does a wheel upgrade affect warranty or insurance?
It can. Let your insurer know by email or letter, and store the original wheels so you can refit them for warranty work.