Skip to content
AutoTyreSize Decode a size

Royal Enfield Classic 350 Tyre Size, Front and Rear

Quick answer100/90-19 front and 120/80-18 rear; earlier version 90/90-19 and 110/90-18

Tyre sizes19 inch front18 inch rearTubeless on alloysChecked 13 Nov 2026

Independent owner guide. Not affiliated with Royal Enfield. Figures checked against the maker's published details; confirm on your vehicle's door sticker or manual.

For the current model, the Classic 350 tyre size reads 100/90-19 on the 19 inch front rim and 120/80-18 on the 18 inch rear rim, as listed by Royal Enfield. Spoke wheel bikes use tube type tyres, while alloy wheel bikes run tubeless tyres of the same size.

The earlier version, which includes the BS4 bikes still seen everywhere, used thinner 90/90-19 front and 110/90-18 rear tyres. Check which engine generation your bike has before you buy rubber.

Classic 350 fitment card

Front tyre
100/90-19 57P
Rear tyre
120/80-18 62P
Wheels
19 inch front, 18 inch rear; spoke (tube type) or alloy (tubeless)
Tyre pressure (cold)
Front 22 psi, rear 32 psi riding solo
Earlier version tyres
90/90-19 front, 110/90-18 rear
Battery
12 V, 8 Ah maintenance free
Rear 18 inch spoke wheel and tyre of a retro style 350cc motorcycle parked on a stone road
The Classic 350 runs a 19 inch front and an 18 inch rear wheel.

Royal Enfield Classic 350 tyre size table

VersionFrontRearWheel
Current, spoke wheels100/90-19 57P tube type120/80-18 62P tube type19 inch front, 18 inch rear spoke
Current, alloy wheels100/90-19 57P tubeless120/80-18 62P tubeless19 inch front, 18 inch rear alloy
Earlier version (BS4 and older)90/90-19110/90-1819 inch front, 18 inch rear spoke

The Classic 350 wheel size has never changed: a 19 inch rim leads and an 18 inch rim follows. Only the tyre width and profile changed when the bike was rebuilt on its newer engine and frame, the version many riders call the Classic 350 Reborn. Plenty of riders still say Bullet Classic, but the Bullet Classic 350 tyre size is simply this table.

What 100/90-19 57P and 120/80-18 62P mean

On the classic 350 front tyre size, 100 is the section width in millimetres, and 90 tells you the sidewall stands 90 mm tall, being 90 percent of the width. The rim measures 19 inches. On the back tyre size, 120 mm width with an 80 percent profile gives a 96 mm sidewall on an 18 inch rim.

The load index 57 means each front tyre can carry up to 230 kg, and 62 at the rear means 265 kg. The letter P is a speed rating of 150 km/h. Any replacement should match or beat these figures, since this is a heavy bike that often carries a pillion and luggage.

Classic 350 rear tyre size vs the old one

Riders upgrading an older bike ask if the new sizes will fit. Here is how the overall diameters compare.

SizeSumOverall diameter
90/90-19 (old front)483 + 162645 mm
100/90-19 (new front)483 + 180663 mm
110/90-18 (old rear)457 + 198655 mm
120/80-18 (new rear)457 + 192649 mm

The new rear is almost the same height as the old one but wider. On the earlier frame, the wider tyre may come close to the chain, swingarm or mudguard stays. Have a tyre shop check the gap with the wheel fitted before you ride. Rim width on the older spoke wheel also limits how wide you can go.

Tubeless tyre for Classic 350

Only the alloy wheel variants run tubeless tyres from the factory. A standard spoke rim leaks air through the spoke holes, so a tubeless tyre on it still needs a tube inside. Riders who want the convenience of plugging a nail at the roadside usually move to the factory alloy wheels. See Classic 350 alloy wheels and the comparison of tubeless vs tube tyre types.

Choosing replacement tyres for this bike

Most Classic 350 owners ride in the city all week and do highway runs on weekends. A road pattern tyre from a reputable tyre maker suits that well. Block pattern tyres look rugged and help on broken village roads, but they hum on tarmac and grip less in the wet. Stick with the factory sizes at both ends. Fitting a wider rear without a matching front makes the steering slow and heavy in traffic.

When the tyres are due for a change

Check the tread wear indicators, tiny rubber ridges sitting across the bottom of the grooves marked by a triangle on the shoulder. When the tread reaches them, replace the tyre. Sidewall cracking, a lump after a pothole strike, or a tyre older than about five years also call for a tyre shop inspection. Decoding the four digit week stamp is covered on our page about the tyre manufacturing date.

Questions owners ask

What is the Classic 350 front tyre size?

The current model uses 100/90-19 57P at the front. The earlier version used 90/90-19.

What is the Royal Enfield Classic 350 back tyre size?

The current rear tyre is 120/80-18 62P. Earlier bikes, including the BS4 versions, used 110/90-18.

What is the Classic 350 BS4 tyre size?

The BS4 Classic 350 came with 90/90-19 front and 110/90-18 rear tyres on spoke wheels.

Is the Classic 350 Reborn tyre size different?

Yes. The rebuilt model moved to 100/90-19 front and 120/80-18 rear, a little wider than before, on the same 19 and 18 inch rims.

Can I fit tubeless tyres on Classic 350 spoke wheels?

Not without a tube. Spoke rims leak air through the spoke holes. The alloy wheel variants are the ones built for tubeless tyres.

What is the Classic 350 wheel size?

Every version rolls on a 19 inch front rim and an 18 inch rear rim.