Yamaha specifies a 12 volt, 4.0 Ah unit as the MT 15 battery size, and the fitted one should carry that rating on its label. That small capacity is normal for a fuel injected 155 cc motorcycle with an electric start and LED lights.
Size here means two things: the electrical rating and the physical box. When buying, match both, and also the terminal positions, so the cables reach without stretching.
MT-15 fitment card
- Front tyre
- 100/80-17 52P, tubeless
- Rear tyre
- 140/70 R17 66H, radial tubeless
- Wheels
- 17 inch alloy, front and rear
- Tyre pressure (cold)
- Front 32 psi, rear 36 psi riding solo
- Brakes
- 282 mm front disc, 220 mm rear disc, with ABS
- Battery
- 12 V, 4.0 Ah

MT 15 battery size at a glance
| Item | Value |
|---|---|
| Voltage | 12 V |
| Capacity | 4.0 Ah |
| Where to confirm | Label on the fitted battery, owner's manual |
Wipe the dust off the sticker on the old unit and study it before shopping. It shows the capacity, the type and often a model code. A parts shop can match the code to a replacement of the same dimensions.
Why the rating matters on this bike
Fuel injection, ABS, the digital console and the starter all lean on steady voltage. Fit something undersized and winter starts turn sluggish; a tired cell can blank or reboot the console. An oversized case overhanging its cradle tends to chafe the loom. Keep to 12 V, 4.0 Ah and the original footprint.
Finding the battery
The battery sits under the seat on most naked bikes of this type. Remove the seat as the manual describes, lift any cover, and you will see the battery held by a rubber strap. Note which cable goes to which terminal. Red is positive, black is negative. Take a photo before you touch anything.
Replacing it step by step
- Key out, ignition off.
- Loosen the black lead before touching the red one.
- Unhook the rubber band and raise the unit upright, keeping it level.
- Brush away any white crust from the cable lugs.
- Lower the fresh unit in, oriented as before, terminals on the same side as before.
- Bolt on red first and black last, snug but not cranked hard.
- Strap it down, refit the seat and thumb the starter to confirm.
Signs the battery is weak
- Starter clicks or turns slowly, especially after a few days parked.
- Horn sounds weak and lights dim at idle.
- The console forgets the clock or zeroes the trip after parking.
- The case looks swollen or there is a smell near the seat.
Any puffed up or weeping case needs replacing that same day. Have a mechanic test the charging system too, since a faulty regulator can kill a new battery quickly.
Keeping it healthy
Five minute dashes to the market never put back what the starter took. Once each week, take the MT-15 out for thirty unhurried minutes. Leaving it idle through a long holiday? Hook up a maintenance charger rated for small motorcycle cells; the types are compared on bike battery charger. In heavy monsoon, check that water has not collected around the tray. Extra accessories such as aux lamps or phone chargers drain a 4.0 Ah battery faster, so add them carefully.
Lithium options and other pages
Some riders ask about lithium batteries for weight saving. They need a charging system that suits them, and our lithium ion battery for bike guide covers what to check. More bikes appear on our bike battery hub, sorted by maker. Tyre details for this bike are on MT-15 tyre size.
Questions owners ask
What battery does the MT-15 use?
A 12 V battery rated at 4.0 Ah. Match the size of the box and terminal layout of your current battery when replacing it.
Is a bigger Ah rating allowed on the MT-15?
Provided the box drops into its cradle and the strap closes, a modestly higher rating does no harm. A taller case can press on wiring.
How long does an MT-15 battery last?
It depends on use and charging. Watch for slow cranking and dim lights rather than counting months.
Why does my new battery die quickly?
A charging fault, a drain from accessories, or short rides can cause it. Have a mechanic test the charging output.
Which terminal do I disconnect first?
Negative first when removing, positive first when fitting.