Skip to content
AutoTyreSize Decode a size

Datsun GO Tyre Size for GO and GO Plus

Quick answer165/70 R14 on the last GO and GO+; 155/70 R13 on the earlier version

Tyre sizesEarlier 155/70 R13No longer sold newChecked 13 Nov 2026

Independent owner guide. Not affiliated with Datsun. Figures checked against the maker's published details; confirm on your vehicle's door sticker or manual.

The Datsun GO tyre size for the final GO and GO+ is 165/70 R14, while earlier cars rolled on smaller 155/70 R13 rubber. So begin by checking whether your hatch has 13 or 14 inch wheels.

Datsun has stopped selling both models, yet these light hatchbacks and compact seven seaters remain common as family runabouts and cabs. Hatch and seven seater share sizes within each version.

GO fitment card

Tyre size
165/70 R14 on the last GO and GO+
Earlier version
155/70 R13 on the first GO and GO+
Wheels
14 inch on the last version, 13 inch on the earlier one
Tyre pressure (cold)
About 33 psi rear, 32 to 33 psi front; confirm on the door sticker
Status
No longer sold new
Sidewall of a 14 inch tyre on a steel wheel of a small hatchback parked in a tyre shop
A 14 inch tyre with a tall sidewall suits small hatchbacks on broken roads.

Datsun GO tyre size by version, hatch and GO Plus

VersionFrontRearWheel
Last GO and GO+ (D, A, A Option, T, T Option, CVT)165/70 R14165/70 R1414 inch
Earlier GO and GO+155/70 R13155/70 R1313 inch

A datsun go plus tyre size matches the hatch in each version, even with that third row aboard. Correct inflation therefore matters more once all seats fill up.

Spotting which version you own

Look at the final number in the marking on any tyre: R14 or R13. Fourteen points to the later car, thirteen to the earlier. Measuring rim width by tape also works, but reading the wall is quicker. Avoid relying on the registration date alone, because rims often get swapped when cars change hands.

Reading 165/70 R14 on the GO

  • 165: tread width, millimetres.
  • 70: wall height equals seven tenths of width, around 116 mm.
  • R: radial carcass.
  • 14: wheel diameter, inches.

Combined, total height comes near 356 + 2 x 116 = 587 mm. The earlier 155/70 R13 gives 330 + 2 x 109 = 547 mm, so the later GO stands on noticeably taller rubber, handy over speed breakers. When buying fresh tyres, ask for ratings equal to or above those on the old Datsun rubber.

Upsizing a GO or GO+

Datsun's original height is the yardstick; stray no more than 3 percent from it. On a 14 inch car:

SizeSum in mmChange
165/70 R14 (stock)356 + 2 x 116 = 587base
175/65 R14356 + 2 x 114 = 583about 0.6 percent smaller
175/60 R15381 + 2 x 105 = 591about 0.7 percent larger

175/65 R14 reuses existing rims and adds a touch of width. 175/60 R15 needs fresh 15 inch wheels; confirm centre bore and offset with the wheel seller and try our PCD calculator. Anyone with an early 13 inch GO can adopt the later 165/70 R14 setup on 14 inch rims, because Datsun itself fitted it to this body. Broader rubber steers heavier and may cost a little mileage, and your policy papers should mention any rim change.

Pressure, load and the spare

Sources list roughly 33 psi behind and 32 to 33 psi ahead, cold. Datsun printed its own value on a sticker by the front seat belt pillar and repeated it in the handbook; follow that, especially for a GO+ that regularly carries seven passengers plus bags. Numbers embossed on rubber are maximums, not fill targets. Inspect the boot spare monthly; finding it flat beside a dark highway helps nobody.

When GO tyres need replacing

Tiny raised ridges sit inside the main grooves. Once tread wears flush with those ridges, retire the tyre. On a featherweight hatch like this, bald rubber aquaplanes early across flooded roads in the rains. Replace sooner on spotting cracks, a bulge or sidewall cuts, and let a fitter look over any damage. Move tyres between axles during every service, because this Datsun's driven front pair also handles all the steering.

Owners comparing budget hatches can open the Kwid tyre size or Wagon R tyre size pages, or scan every car through the car size index, sorted by maker.

Questions owners ask

Does the GO Plus take a different size from the hatch?

No. Final GO+ cars roll on 165/70 R14, same as the five seater. Earlier GO+ examples used 155/70 R13.

Could an early 13 inch GO move to 14 inch wheels?

Yes. Datsun's later GO ran 165/70 R14 on this body. Ask the shop to verify wheel fitment and inform the insurance company.

Which pressure does a Datsun GO need?

Sources give about 33 psi behind and 32 to 33 psi ahead, cold. Datsun's own figure sits on the door placard and in the handbook.

Is the Datsun GO still sold?

Datsun stopped selling the GO and GO+. Both sizes stay easy to buy at tyre shops.

Which bigger size suits the Datsun GO best?

175/65 R14 on original rims stays within 1 percent of stock height. 175/60 R15 also passes that test but needs new 15 inch wheels.